Jul
How to Anchor Ledger Boards to Masonry
There are a variety of making assignments that will demand the attachment of ledger boards to masonry. A popular use is throughout deck developing. The safe attachment of deck to house will guarantee the longevity of your deck as perfectly as the basic safety of your pals and family. While the process is not problematic, it truly is vital to take the time to do it accurately and use only the most effective high quality making supplies.
Difficulty:
Moderately Challenging
Guidelines
Issues You are going to Want
Ledger board (minimize to size)
Pencil
Levels
Lag screws
Warm-dipped galvanized (HDG) nails
HDG washers
Hammer drill with masonry bit
1 inch paddle bit
Socket wrench
Anchor bolts and washers
Growth anchors
Hammer
Sealant gun with silicone sealant
1
Drill holes in the middle of the board at sixteen-inch intervals.
2
Hold the ledger board in opposition to the wall with the help of an assistant. Use the level to make positive its level and positioned effectively. Mark positions of the holes on the wall with the pencil.
3
Use the hammer drill with the masonry bit (the diameter of the lag screws) to drill holes 3 inches into the wall on the pencil lines.
4
Push expansion anchors into the holes you drilled in the wall. Use the hammer to get them flush with the wall.
5
Place the board in opposition to the wall, in line with the marked holes and safe with lag screws. Location a washer above the hole in the board and screw the lag through the board and into the wall with socket wrench.
6
Seal the screws with the silicone sealant.
<div
